Details

Product characteristics:
1. Excellent shape, the amorphous film easy to use activated polymer, material after activation can local extension, has good smoothness, to film by plane change is a curved surface, to completely fit the shape of shoe last, to achieve the best shape, does not produce wrinkles lines traces, such as water chestnut.
2 in the use of heel without V shaped notch, not sharp, show the beautiful arc line shape.
3 film with high flexibility, for the current industry's highest standards, can ensure that the last set of long-term deformation.
4 high hardness and thickness ratio, in the same hardness, can reduce the weight, the thinner the thickness specification to replace the existing traditional film, reduce the cost of raw materials. Can cut more layers of material at the same time, improve production efficiency.
5 film has the appropriate activation temperature, easy to heat activation (softening), setting is simple, can be used to activate the simple device and set. Film has a long open time, can reduce the bad rate due to the setting.
6 the use of a wide range of temperature, from - 30 to +70 for the anti - pressure, rebound rate, setting effect and the ability to maintain a good, will not produce softening or deformation.
7. Excellent adhesion, film outer coating of special hot melt adhesive, and the majority of the material (epidermis, the outermost layer of skin, etc. various kinds of leather) direct bonding, no extra glue, shorten the working flow, reduce the cost, and improve the working environment.
8. After the structural design optimization of polymer material combinations, in material any part is hot melt bonding effect, double-sided adhesive design can be allowed in any side of the cutting edge, does not affect its ability to fit.
9 traditional muslin or nonwoven fabric products, cut the shape after the leftover material cannot be reused, resulting in the loss of material and environmental problems. After cutting of the film, the side foot material can be completely recycled, no pollution problem.
10 when the shape of the cut is not directional restrictions, easy to layout, improve the material utilization rate.