Details

Mainly used for testing instrument molten index melt viscosity low (flow rate and 50g / 10min at 0.15 between thermoplastic materials) in the process of polymerization rate uniformity of logistics. This machine is in the regulation according to temperature, temperature and piston cylinder cylinder position in such conditions, with timing measurement method. Molten plastic squeezed through the specified length and diameter of holes, the rate of mould discriminant process of the flow rate of polymer chthonians evenness, can be manually or automatically cut the election material feeding, automatic timer cut with alarm function.

Based on the standard: D1238 - D3364, ASTM, JIS, ISO - R1133 K72110 - and GBT - 3682

Instrument specifications and parameters of molten index:

Temperature control: normal ~ 300 degrees, PID control accuracy ± 0.1 degrees (including overtemperature protection)

Fa code: 2160g, 3800g 1000g, 5000g, 7160, 10000g g, 12500g, 21600 g, either.

Automatic cutting device: automatic cutting materials, manual cutting materials can choose

Set time: 99M: 59S set arbitrary

Circular cone: φ 9.5504 ± column 0.0076 mm

Living: φ 9.4742 ± 0.0076 mm

Fine holes: ± 0.02 mm diameter, pore 9.5 2.0955 ± 0.0051 mm:

Long degrees 8.00 ± 0.025 mm.

Enclosed mercury thermometer: 150 ° c, 250 ° c, 200, 300 degrees (either)

Match: clean, pig a great team, conducting bar, a GuanChaJing a, bakelite, a feed hopper 3 pieces, plastic steel plates were two small KongMo rules.

Body: 51 (40 x deposition 60cm

Weight: 42kg (excluding Fa)

Electrical source: 1 for, AC220V, 7A