Details

This machine is suitable for lower melt viscosity of thermoplastic plastics quality control. Measurement is prescribed temperature, load, and the location of the piston in the cylinder under the barrel to measure the time determined by the provisions of molten plastic way through the length and diameter The rate of pore model, the process used to determine the system flow rate of polymer uniformity.
According to standard ASTM-D1238, D3364; JIS-K7210; GB / T 3682-2000
1. For flow rates between 0.15 to 100g/10 min material.
2. Temperature control of room temperature ~ 400 ℃,
3. Adopt dual temperature control, PID control
4. Accuracy ± 0.1 ℃ (including over-temperature protection)
5. Weight 1000g, 1200g, 2160g, 3800g, 5000g, 7160g, 10000g, 12500g, 21600g
6. Automatically cutting material automatic cutting, manual cutting material choice
7. Set the arbitrary time of 1 ~ 999s
8. Annex 1-pass pipe cleaning brush device 1, a conducting rod 1, a viewer, a feed funnel, scraping plastic sheet 3, Determination of pore-mode regulation of a volume (W × D × H) 40 × 51 × 60cm
9. Weight 42kg (without weights)
10. Power 1 ∮, AC220V,