Details

Batteries are battery tester extrusion in two planes compacts, through the grip or piston hydraulic pressure 32mm diameter is about 13KN arm, extrusion to hydraulic pressure readings to buy on zang 17.2 MPa, once the maximum pressure, remove extrusion. For cylindrical battery, the battery of extrusion long axis should be the extrusion planar parallel extrusion equipment, prisms, pressure should form batteries applied perpendicular to its long axis in two axis, then squeeze another axial, button batteries, extrusion of the plane. Each battery only by extrusion again.

Purpose: to test battery extrusion product applicable to all types of batteries in domestic waste simulation, battery suffers extruding (such as compaction garbage), the test conditions and the provisions UL1642 [13].

Based on the standard: battery extrusion test functions meet SJ/T11169-1998 eqv (1995), UL 1642: SJ/T11170-1998 eqv (1997) : 2054 UL, UL 1642 [13], GB8897.4-2002 6.3.2.9 IEC60086-20 2006, idt test method of such requirement.

Battery extrusion machine specifications:

Pressure range: 150N 15KN ~
Test accuracy ± 0.1%.
Explosion-proof box and material: 45 # steel lacquer processing
Stress transmission mode:
1 and crush test hydraulic) :
A) batteries are two planar powder live,
B) the hydraulic pressure plate transmission,
C) battery is solid, live until after the start, extrusion pressure hydraulic cylinder to 17.2 (Mpa) digital 2500, two boards for the 3000pound between 13KN (pressure), sudden release pressure,
D) battery diameter is parallel to the board, square, the need for battery rotates 90 degrees to squeeze,
E) pressure range: 13KN
F) shows pressure precision: ± 1.0 kg
G) compression space: 30 * 30cm * (40 adjustable)
H) use voltage isolator, one 220V ± 10%
I) explosion-proof box dimensions: 1300 800mm (H * * 600 x D * W),

250N pressure test mode 2: (pressure),
A) equipment can provide constant 250N ± 10N (56 ± 2pound) pressure, for at least the 5S clock (time),
B) mechanical force,
C) battery respectively and squeezing the top, bottom, etc
Weight: about 85Kg.
Note: the non-standard products can be customized according to requirements.